Skip to content

Data Sheets & Manuals

HCW Hazardous-Area Gas Cylinder Warmer — 15 × 43 in, 240 VAC

Part Number: HCW15431502

Availability: CALL FOR AVAILABILITY

$2,723.18

Hazardous Area — CSA Class I, Division 1, Groups B, C and D full-coverage warmer for a 15 × 43 in (381 × 1092 mm) metal gas cylinder; 240 VAC, 150 W. Designed for condensation control and pressure/temperature consistency.

This HCW hazardous-area gas cylinder warmer surrounds the cylinder body to distribute heat evenly. Maintaining cylinder temperature can promote vaporization, improve pressure consistency, reduce condensed-gas waste, and support repeatable process control. The self-regulating heating element does not require an additional temperature controller under the documented operating conditions.

Technical specifications

  • Manufacturer SKU: HCW15431502
  • Cylinder size: 15 × 43 in (381 × 1092 mm)
  • Electrical: 240 VAC, 50–60 Hz, 150 W
  • Construction: silicone-impregnated cloth outer shell; 2 in (51 mm) fiberglass side insulation and 0.5 in (13 mm) top insulation.
  • Closure: hook-and-loop fastener.
  • Power lead: 10 ft (3 m) Teck 90 cable with bare wire leads.
  • Ambient range: 30–95°F (-1–35°C).
  • Approval: CSA Class I, Division 1, Groups B, C and D. Confirm the site classification before selection.
  • Applications identified by the manufacturer: SF6, propane, nitrogen, oxygen, BCl3, WF6, and HF service may benefit; application compatibility and area classification remain the purchaser’s responsibility.

Selection and installation

Verify cylinder body diameter and heated height, available supply voltage, and environmental classification before ordering. Install only on a compatible metal cylinder and follow the current manufacturer instructions. Ordinary GCW and hazardous-area HCW models are not interchangeable.