Overview
This Hotset Hotflex flexible tubular heater is the exact stock configuration identified by SKU 6300650. Select by cross-section, overall length, voltage, wattage, groove geometry, bend requirement, and termination.
Technical Specifications
| Cross-section | 8 mm round |
|---|---|
| Overall length | 650 mm |
| Heated length | Not separately published |
| Voltage | 240 V |
| Wattage | 1380 W |
| Calculated current | 5.75 A |
| Calculated resistance | 41.74 Ω |
| Approx. sheath loading | 8.45 W/cm² |
| Minimum bend radius | 10 mm minimum internal radius |
| Termination | M4 threaded pins |
Construction
Round flexible tubular construction intended to be formed into a correctly sized tool groove. Do not substitute a different diameter or termination solely because length and wattage are similar.
Electrical
Calculated current and resistance are independent QA values derived from the listed voltage and wattage. Confirm controller and circuit capacity for the installation.
Dimensions
Overall length is the manufacturer stock length. A separate heated length and cold-section dimension were not published for this stock record and are not inferred.
Bending / Installation
Respect the listed minimum internal bend radius and manufacturer groove geometry. Form progressively, avoid repeated sharp reverse bends, and maintain uniform support and heat transfer.
Termination / Leads
M4 threaded pins. External lead hardware and connection protection must suit the application.
Typical Applications
Appropriate for compatible molds, dies, hot-runner tooling, and formed process-heating channels within the exact product ratings.
Documentation
Current manufacturer family and stock table: https://www.cetal.com/flexible-tubular-heater-hotflex.





