Overview
This is a 120 volt nozzle band heater. Order part number NZ2510-10300. Confirm the inside diameter, width, voltage, wattage, and lead style before ordering.
Specifications
| Inside diameter | 2.5 in |
|---|---|
| Width | 1 in |
| Voltage | 120 V |
| Wattage | 300 W |
| Calculated current | 2.50 A |
| Construction | Oxidation-resistant metal-sheath nozzle band |
| Clamping | Stainless clamping strap with barrel nuts |
| Lead style | High-temperature leads |
Before You Order
Match the voltage printed on the heater or specified for the machine. A 120 V heater and a 240 V heater are not interchangeable. The band must fit the heated surface closely and evenly.
Installation
Install with full surface contact, tighten the clamp evenly, and use suitable temperature control. Do not energize a loose or incorrectly sized band heater. Confirm lead clearance and protection before connecting power.





