This ProTherm 2½ in NPT screw-plug immersion heater uses a Brass plug, 3 heating elements, and a nominal 48 W/in² watt-density family. It is configured to order through the selections above; the validated combination determines the finished ProTherm PT part number.
Technical specifications
| Base family SKU | PTWH3 |
|---|---|
| NPT connection | 2½ in NPT |
| Screw-plug material | Brass |
| Element sheath | Incoloy 840 |
| Nominal watt density | 48 W/in² |
| Element count | 3 |
| Available output | 3–20 kW |
| Available voltage | 240 / 480 VAC |
| Phase | Three phase |
| Selectable immersion range | 8–51 ⅛ in |
| Standard enclosure | NEMA 1; configured enclosure and thermostat options are shown above |
| Terminals | #10-32 threaded-stud terminals |
| Published plug dimensions | Detailed dimensional relationship pending manual source verification |
Dimensional reference
Construction and features
- Incoloy 840 element sheath with high-purity compacted magnesium oxide insulation.
- Nickel-chromium resistance wire and fusion-welded pin-to-resistance-wire junction.
- The Incoloy 840 elements are silver-brazed into the brass screw plug.
- Moisture-sealed element ends; sealing construction is selected for the intended medium.
- Accessible NEMA 1 terminal housing with fixed conduit support.
- Spacer supports are used on applicable multiple-element units with longer immersed lengths.
- Applicable units may be configured with thermostat, thermowell, and alternate enclosure options shown in the product selector.
Typical applications
- Industrial liquid, oil, air, or solution service only after application review
- Confirm medium compatibility, operating temperature, watt density, and sheath loading with HEP Engineering
Why watt density matters
This higher-watt-density family provides compact output for water or compatible solution service. Confirm that the heated medium can accept the selected surface loading. Watt density is one part of heater selection; also verify sheath and plug compatibility, liquid level, circulation, operating temperature, and controls.
Configuration
Select the required output or immersion length, voltage, and available terminal-housing or control options using the configurator above. HEP’s explicit mapping validates the combination and displays the finished ProTherm part number; the family SKU is not the finished ordering number.
Engineering and application support
Confirm chemical compatibility, allowable watt density, required immersion, voltage, phase, enclosure rating, and control strategy before installation. Keep the heated section immersed during operation. For uncertain media or non-standard requirements, use the Screw Plug Heater Engineering Selector or contact HEP Engineering.


