Non-Hazardous Harsh Environment Constant-Wattage Heating Cable

Tinned copper braid with FEP overjacket for harsh environments.
Circuit load: 0.033 amps per foot
Maximum circuit length: 350 foot
Maintains temp to 320°F
Jacket withstands temp to 392°F

Our CWJ12 general purpose, constant wattage heating cable is a proven, reliable solution for industrial process temperature maintenance and freeze protection. CWJ12 features a parallel heating core that produces uniform thermal output over its entire length. Using a single power point, you can easily configure and install a heat tracing system as short as several feet or as long as 780 feet right in the field.

• Uniform Thermal Output, Low Energy Cost
• No Inrush at Any Ambient
• Maximum Exposure Temperature, Power Off, 392°F (200°C)
• Steam Cleanable on Process Equipment Up to 190 PSIG (Power Off)
• Approximate Size 1/4"W x 1/8"H
• Minimum Bend Radius 1-1/4"
• For Use on Metallic Pipes

WARNING — A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30mA is recommended to minimize nuisance tripping.