Standard Duty Silicone Rubber Metal Drum/Pail Heater

Drum and Pail Heaters are designed to provide practical, efficient means of freeze protection, viscosity control, and maintenance of materials at elevated temperatures. The DHCS Drum/Pail heaters are designed with two extra-thick layers of fiberglass reinforced silicone rubber for use on metal drums/pails.

Heater Width: 4 in (102 mm)
Voltage Options: 120 VAC or 240 VAC
Exposure Temperature: -60°F to 450°F (-51°C to 232°C)
Dielectric Strength: Over 2000 Volts
Attachment Type: Expandable spring closure — expands up to 3 in (76 mm)
Silicone Rubber Density: Standard duty: 46.0 oz/yd² (1560 g/m²

Power Cord: 6 ft (1.8 m) long with choice of plug

• Standard 120 VAC: 3-prong grounded plug (NEMA 5-15P)
• CSA/cURus approved 120 & 240 VAC: bare wire leads

IP Rating: IP54

CE approved for models with bare wire leads

Part numbers ending with an "A":

• CSA approved 
• cURus approved if used under 392°F (200°C)

Standard Duty - Standard Design Silicone Rubber Drum/Pail Heaters

Standard Duty - CSA and cURus Approved Designs